Materials & ProductsExclusive Articles, from ArchDaily

A group of researchers from KTH Royal Institute of Technology in Stockholm has developed Optically Transparent Wood (TW), a new material that could greatly impact the way we develop our architectural projects. Published in the American Chemical Society's journal Biomacromolecules, the transparent timber is created through a process that removes the chemical lignin from a wood veneer, causing it to become very white. This white porous veneer is then impregnated with a transparent polymer, matching the optical properties of the individual cells and making the whole material translucent.

Japan-based Komatsu Seiten Fabric Laboratory has created a new thermoplastic carbon fiber composite called CABKOMA Strand Rod. The Strand Rod is a carbon fiber composite which is covered in both synthetic and inorganic fibers and finished with a thermoplastic resin. The material has been used on the exterior of Komatsu Seiten’s head office.

Swept up in an age of digitization and computing, architecture has been deeply affected in the past decade by what some critics are calling “The Third Industrial Revolution.” With questions of craft and ethics being heavily present in the current architectural discourse, projects taking advantage of these new technologies are often criticized for their frivolous or indulgent nature. On the other hand, there has been an emergence of work that exemplifies the most optimistic of this “Third Industrial Revolution” – an architecture that appropriates new technology and computation for the collective good of our cities and people.

Although many have come to question our unwavering devotion to hermetically sealed buildings, most construction budgets are still dominated by costs associated with HVAC and other quality of life standards. With some questioning the efficacy of such practices, and others taking fault with the costs, there is now immense incentive to create new technologies and techniques that could allow us to retain the benefits of such climate control without the environmental and monetary cost they currently carry.

It's no secret that among the architecture profession's biggest sources of guilt is our reliance on concrete in a huge number of the buildings that we have a hand in creating. Architects are more likely than most to be aware of the environmental implications of the material, and yet we continue to use it at an alarming rate. But what alternatives are there in order to do our job? In an article for Forbes, Laurie Winkless runs down a list of three alternatives that stand a good chance of changing the face of concrete construction.

The most revolutionary material in architecture may be one we’re already quite familiar with: glue. In a recent article for New Scientist’s New Urbanist column, futurist Geoff Manaugh of BLDG BLOG argues that the typical building’s structural system may soon see an overhaul. Instead of steel held together with bolts and welds, petroleum-based composite materials and carbon fiber panels fixed in place with glue could serve as both a building’s structure and skin.

Videos

Fabric is viewed as a material which is flat and two-dimensional and thus, until recent times, it has been used in architecture as a surface sheet. However the material has not been fully exploited.

Anish Kapoor, a British-Indian sculptor, now owns the exclusive rights within the field of art to Vantablack, currently the world’s darkest material. Developed by a team of scientists at Surrey NanoSystems in 2014, Vantablack absorbs all light and creates a crease free abyss which is often compared to a black hole. Other artists, such as Christian Furr, had intended to use Vantablack in a series of paintings, but no longer can due to Kapoor’s monopolization. “All the best artists have had a thing for pure black — Turner, Manet, Goya,” he told Daily Mail. “This black is like dynamite in the art world. We should be able to use it. It isn’t right that it belongs to one man.”

Videos

IaaC Student Elena Mitrofanova, working alongside biochemist Paolo Bombelli has created a proposal for a facade system that utilizes the natural electricity-generating power of plants. Consisting of a series of hollow, modular clay "bricks" containing moss, the system takes advantage of new scientific advances in the emerging field of biophotovoltaics (BPV) which Mitrofanova says "would be cheaper to produce, self-repairing, self-replicating, biodegradable and much more sustainable" than standard photovoltaics.

Videos

Hardboard is a wooden fiberboard that is produced by compression at high temperatures, making a smooth and uniform surface. It is known for being highly flexible and very resistant to humidity. In spite of these qualities, the product has been pigeonholed for specific uses -- rear panels, bases, packaging -- losing visibility and importance in the world of architecture and design.

For the past several years, there’s been increasing talk of a renaissance in timber construction. Although we are predisposed to thinking of wood as a component limited to the classic balloon-frame house, new technologies have generated alternative materials which look like and are created from wood, but are stronger and more versatile than their more traditional cousins. While there are a number of different products on the market, including Glulam and Laminated Veneer Lumber (LVL), the material that seems to hold the most promise for changing construction is Cross Laminated Timber (CLT).

“Concrete has the ability to be primitive and technological, massive and levitating, to combine the properties of steel with those of mud,” says Rowan Moore in his list of The 10 best concrete buildings created for The Guardian. Through examples spanning three continents, Moore unites old standbys with unexpected wonders, all of which show the varied possibilities inherent in mixing water, aggregate, and cement. In a list that incorporates examples from Classical times to the present, Moore establishes concrete’s unique ability to adapt to different times, styles, applications, and treatments.

Located high in the Himalayan Mountains, the sparsely populated region of Ladakh is one of the more remote places on Earth. At over 3500 meters above sea level, the region includes terrain consisting of steep cliffs and wide valleys, and an extreme climate to match: temperatures often reach +30 degrees celsius in the summer months and drop to -30 degrees celsius in the winter. Severe weather patterns such as these typically require durable construction materials and technologies - yet with the region’s difficult-to-reach location and a construction season lasting only four to six months, importing materials becomes a costly, if not impossible task. Luckily, with help from Czech architecture firm Archide, residents were able to find that the best material for the job was one found right outside their doors: rammed earth.

Videos

DIY wooden pallet creations are an increasingly popular trend, with projects ranging from building pieces of furniture to even making an outdoor pool. In their latest how-to, Interesting Engineering brings the DIY trend to a much larger scale with a video showing how to build a house using wooden pallets. Watch the video above to learn how to make a wooden pallet house and check out some tips from the video after the break.

Videos

In 2013, Skylar Tibbits of the MIT Self-Assembly Lab introduced a new phrase to the architectural lexicon: 4D Printing. The concept, which built on the hype surrounding 3D printing and added the dimension of time, describes materials that can be constructed through 3D printing in such a way that they later react and change shape in response to an external stimulus such as heat or moisture.

Bringing the world’s top designers and business leaders together to discover how design makes the world better, smarter, cooler, and more innovative. Bloomberg Businessweek Design highlights the intersection of design, technology and business. The day-long event draws attendees from every industry that relies on design—social media, ecommerce, graphic design, robotics, nanotechnology, data visualization, genomics, architecture and fashion. Learn more and purchase tickets, here. 

Videos

When it comes to scrutinizing architectural materials for their energy efficiency, one offender stands out above the rest: glass. Windows and curtain walls act as one of a building’s main outlets for heating and cooling losses, and as society advances into its more environmentally-conscious future, new, passive solutions will need to be developed to mitigate buildings’ energy footprints. In recent years, various smart glass technologies have been designed to automatically regulate light and heat based on environmental conditions. Yet their high price tags have prevented them from achieving widespread application. Now, a team of MIT researchers may have discovered an alternative to smart glass that could come at an affordable price.

Videos

You’ve probably never given much thought to the seemingly basic interior partitions of an airplane, but building codes are a walk in the park compared to the exacting standards of aviation design. Those thin panels that separate the seats from the plane's galley must also be capable of supporting the weight of flight attendant jumpseats and providing a removable section to accommodate emergency stretchers - not to mention the rigorous safety standards and crash testing that aviation components must satisfy. With all of these challenges in mind, The Living, an Autodesk Studio, in collaboration with Airbus and APWorks, have developed the Bionic Partition Project, which harnesses generative design and 3D printing to maximize the structural efficiency of the panel, reducing the weight of an aircraft, and saving fuel. And while this particular application is specific to a single aircraft type, the technological advances could have far-reaching implications.